Floating Constants

It is possible to specify only constant offset, or more complicated offsets depending on frequency: \(C_1+C_2\cdot\omega\) or \(C_1+C_2\cdot\omega+C_3\cdot\omega^2\).

These new options are important for designing of ultrafast coatings in the case when a constant/linear/parabolic GD/GDD are required.

The option is useful also in general case, when, for example, it is necessary to design a coating with constant T/R in some spectral region, and the absolute value of this characteristic is not important.

Example (right panel): target transmittance is to be flat in the spectral range in the visible spectral range; transmittance must be in the corridor from 60% to 90% and from 15% to 35% in the spectral ranges from 400 to 570 nm and from 630 to 800 nm, respectively.

• \(C_1\) – spectral characteristics are as flat as possible;

• \(C_1+C_2\cdot\omega\) – spectral characteristics are linear with respect to the frequency \(\omega\) (example in the left panel);

• \(C_1+C_2\cdot\omega+C_3\cdot\omega^2\)   – spectral characteristics are parabolic with respect to \(\omega\)